Sealers

Without a sealer, porous stone, tile, concrete and grout will stain almost instantly. Natural look sealers are formulated to provide stain resistance in porous surfaces whilst maintaining the natural look of the surface. Sealers although not impenetrable and work by providing reaction time to enable you to remove the offending contaminant. Aqua-Seal STS™ provides a range of sealers offering different reaction times against a variety of contaminants.

AQUA-SEAL GOLD+

AQUA-SEAL GOLD+

AQUA-SEAL GOLD+ is a Premium, Low VOC (<5gm/L), natural look, no sheen, breathable, penetrating sealer. NanoPlus™ Formula penetrates deeper and chemically bonds to provide Maximum stain resistance against oil, food, grease & grime plus help consolidate stone, reduce freeze/thaw damage, spalling and efflorescence. Built in RapidPlus™ provides protection in 4 hours. Durable, water based, Non-Flammable, Non- Yellowing, Non-Coating, UV & Chemical Resistant. Safe for food areas.

AQUA-SEAL SILVER

AQUA-SEAL SILVER

AQUA-SEAL SILVER is a Low VOC (<5gm/L), natural look, no sheen, breathable, penetrating sealer. Provides EXCELLENT stain resistance. Also use as a pre-grouting sealer. Water based, Safe, Non-Flammable, Non-Yellowing & UV Resistant. Helps inhibit Efflorescence, Mould and Mildew growth. USE: For indoor, outdoor, domestic and commercial use. Safe for food areas.

AQUA-SEAL BRONZE

AQUA-SEAL BRONZE

AQUA-SEAL BRONZE is a Low VOC (<5gm/L), economical, natural look, no sheen, breathable, penetrating sealer. Provides GOOD stain resistance. Also use as a pre-grouting sealer. Water based, Safe, Non-Flammable, Non-Yellowing & UV Resistant. Helps inhibit Efflorescence, Mould and Mildew growth. USE: For indoor, outdoor, domestic and commercial use. Safe for food areas.

ENCAUSTIC SEAL GOLD

ENCAUSTIC SEAL GOLD

ENCAUSTIC SEAL GOLD formulated with the latest Nano-AQS™ plus Rapid-Seal STS™ Technology to provide maximum stain resistance in 4 hours. NO VOC’s (Volatile Organic Compounds) natural look, water based, below surface, penetrating sealer. Can be used as a pre-grouting sealer. Breathable – Allows excellent Moisture Vapour Transmission (MVT). Non Flammable. For indoor, outdoor, domestic & commercial areas

ULTRA-BLOCK

ULTRA-BLOCK

ULTRA-BLOCK is an economical, Low VOC, water based, installation sealer. Ideal for six sided sealing, dip-sealing, underside sealing & pre-grouting sealing. Helps consolidate stone and make grouting easier. Reduces picture framing, efflorescence, mineral blooming, staining during grouting & adhesive blotch marks which are normally absorbed through the back of the stone during installation. Ideal for all natural stone including bluestone, marble, sandstone, travertine plus terracotta, terrazzo, encaustic tiles etc

SPRAY'N'SEAL

SPRAY'N'SEAL

SPRAY’N’SEAL is a breathable, premium, natural look sealer to provide maximum stain resistance to stone, tile, mosaics, grout & other porous surfaces. It is non-yellowing, non-coating and UV resistant. Can be used on newly installed grout 2 hours after grouting however for best performance allow grout to fully cure before sealing. Utilises the latest NanoPlus™ & Rapid-Seal™ C6 Fluoro Technology to provide good stain resistance after only 4 hours. Can also be used as a pre-grouting sealer. Allows excellent Moisture Vapour Transmission (MVT). For interior & exterior.

The below “How To Videos” should be used only as a quick reference.

Do not hesitate to contact Aqua-Seal STS Technical Service via e-mail sales@aqua-seal.com.au or +61 2 9521 4000 with information specific to the situation you are addressing, for additional options.

Do NOT follow this link or you will be banned from the site!