For additional options, please contact Aqua-Seal STS Technical Services via
e-mail sales@aqua-seal.com.au or +61 2 9521 4000 with information specific to the problem you are addressing.
Problem Solving
Step by step instructions for solutions to the most
common problems associated with Stone, Tile, Grout, Encaustic & Concrete.
- PS 01 – Remove Grout Haze – Light
- PS 02 – Remove Grout Haze – Heavy
- PS 03 – Remove Grout Haze from Natural Stone
- PS 04 – Remove Epoxy Grout Haze
- PS 05 – Remove Efflorescence (Light)
- PS 06 – Remove Efflorescence (Heavy)
- PS 07 – Manage Future Efflorescence
- PS 08 – Remove Porcelain Wax
- PS 09 – Remove Porcelain Wax (Heavy)
- PS 10 – Remove Deep Stains
- PS 11 – Remove Pencil, Metal & Rust
- PS 12 – Remove Adhesive & Mastic
- PS 13 – Remove Ink, Marker, Paint & Silicone
- PS 14 – Remove Sealer Residue
- PS 15 – Remove Sealers & Coatings (Stripping)
- PS 16 – Remove Enhance’N’Seal Residue
- PS 17 – Remove Enhance’N’Seal Residue (Partially Cured)
- PS 18 – Remove Waxes & Floor Finishes
- PS 19 – Remove Waxes & Floor Finishes (Heavy)
- PS 20 – Remove Soap Scum, Hard Water Deposits (Light)
- PS 21 – Remove Soap Scum, Hard Water Deposits (Heavy)
- PS 22 – Remove Soap Scum, Hard Water Deposits from Natural Stone
- PS 23 – Remove Algae, Mould, Mildew, Leaf & Tannins
- PS 24 – Remove Smoke, Soot, Hydrocarbons, Red Soil
- PS 25 – Create Anti-Slip on Slippery Tiles
- PS 26 – Recolour Grout
- PS 27 – Darken Light or Faded Grout
- PS 28 – Repolish Natural Stone (Small Areas)
- PS 29 – Repolish Natural Stone (Large Areas with Compound)
- PS 30 – Repolish Natural Stone (Large Areas with Powder)
- PS 31 – Hone Natural Stone
Important Note
These recommendations are intended as general guidelines for Problem Solving.
The actual product dilution ratios and cleaning requirements may vary depending on the use, amount and method of application.
Read entire Product Label, SDS and Technical Bulletin before using any product.
ALWAYS TEST A SMALL AREA to determine the ease of application, dilution, dwell time & desired results.
Keep surface clean and dry to reduce possibility of slip-fall accidents.