XtremeClean

Heavy Duty Cleaner & Degreaser for Stone, Tile & Grout

XtremeClean™ Heavy Duty Stone, Tile and Grout Cleaner

XtremeClean – Heavy duty cleaner & degreaser for stone, tile, grout, encaustics, terrazzo etc

XtremeClean is a fast acting concentrated high alkaline cleaner & degreaser. It is designed to remove most dirt, grease, grime, soap scum, wax, oil, mildew, algae, porcelain wax, floor finishes & is ideal for areas that have been neglected or subject to heavy use.

USE: For all surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, travertine etc plus porcelain tiles, encaustic tiles, terrazzo, concrete, pavers, saltillo, grout and other surfaces to heavy duty clean and degrease..

Note: After cleaning, for high traffic, commercial or food areas or where premium performance/stain resistance is required – for a natural look use AQUA-SEAL GOLD+ and for a colour enhanced, enriched look use ENHANCE’N’SEAL

Key Features
  • No Acid Formula – Heavy Duty Cleaner and Degreaser;
  • Helps Remove wax, grease, soap scum, body oil, mildew & algae;
  • Ideal for neglected, heavily soiled or areas subjected to heavy use;
  • Specially formulated to strip off synthetic and acrylic waxes & floor finishes;

TEST FIRST

 TEST FIRST: Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.

PRECAUTIONS

 PRECAUTIONS & SAFETY DIRECTIONS: 

  1. Read entire label, SDS & technical bulletin before using; 
  2. Wear appropriate skin & eye protection; 
  3. Use when surface temperature is between 4°C & 32°C; 
  4. Do NOT allow contact with non recommended surfaces;
  5. Do NOT mix with other chemicals;
  6. Regular use of high alkaline cleaners will affect the performance of sealers, coatings & floor finishes;
  7. May lighten some dark grouts & affect some grout colourants.
  8. Do NOT use undiluted. The undiluted product can dull or discolour some surfaces;
  9. Do NOT allow product to dry on the surface. Add more product as required to keep wet.

INSTRUCTIONS

 INSTRUCTIONS:

  1. Sweep, vacuum, or wipe surface;
  2. Dilute XtremeClean with clean water as follows depending on the severity of the problem:
    • a) LIGHT: Dilute 1 part XtremeClean to 15 parts water. 
      • (1 litre = 70ml XtremeClean to 930 ml water)
    • b) MODERATE: Dilute 1 part XtremeClean™ to 10 parts water 
      • (1 litre = 100ml XtremeClean to 900 ml water)
    • c) HEAVY: Dilute 1 part XtremeClean™ to 5 part water ; 
      • (1 litre = 200ml XtremeClean to 800 ml water)
    • d) STRIPPING: Dilute 1 part XtremeClean™ to 3 parts water; 
      • (1 litre = 330ml XtremeClean to 670 ml water)
  3. Carefully apply the solution to surface with a sponge or a mop;
  4. Allow minimum dwell time of 10 minutes. Longer dwell time may be required;
  5. DO NOT ALLOW PRODUCT TO DRY ON THE SURFACE – ADD MORE PRODUCT AS REQUIRED;
  6. Scrub with a white nylon pad, scrub brush or scrub machine;
  7. Remove the dirty solution with a wet vac or mop;
  8. Rinse thoroughly with clean water;
  9. Repeat the process as necessary.

INSTRUCTIONS

 INSTRUCTIONS:

  1. Sweep, vacuum, or wipe surface;
  2. Dilute XtremeClean with clean water as follows depending on the severity of the problem:
    • a) LIGHT: Dilute 1 part XtremeClean to 15 parts water. 
      • (1 litre = 70ml XtremeClean to 930 ml water)
    • b) MODERATE: Dilute 1 part XtremeClean™ to 10 parts water 
      • (1 litre = 100ml XtremeClean to 900 ml water)
    • c) HEAVY: Dilute 1 part XtremeClean™ to 5 part water ; 
      • (1 litre = 200ml XtremeClean to 800 ml water)
    • d) STRIPPING: Dilute 1 part XtremeClean™ to 3 parts water; 
      • (1 litre = 330ml XtremeClean to 670 ml water)
  3. Carefully apply the solution to surface with a sponge or a mop;
  4. Allow minimum dwell time of 10 minutes. Longer dwell time may be required;
  5. DO NOT ALLOW PRODUCT TO DRY ON THE SURFACE – ADD MORE PRODUCT AS REQUIRED;
  6. Scrub with a white nylon pad, scrub brush or scrub machine;
  7. Remove the dirty solution with a wet vac or mop;
  8. Rinse thoroughly with clean water;
  9. Repeat the process as necessary.

LIMITATIONS

LIMITATIONS:

HANDLING, STORAGE & CLEAN-UP

HANDLING, STORAGE & CLEAN UP:

  1. Close container tightly after each use;
  2. Store in original container between 4°C & 32°C.
  3. Shelf life is approx 2 years in unopened container – less after opening;
  4. Storage beyond that time does not necessarily mean the product is not usable. Do a small test area first;
  5. Do not re-use container. Discard in rubbish;
  6. Clean tools and clothing with water before they dry.

FIRST AID

 FIRST AID:

  • Contact a doctor or Poisons Information Centre (Australia Ph: 131-126, NZ Ph: 0800 764766).
  • Ingestion: Do not induce vomiting. Give water or milk to drink.
  • Eyes: Immediately flush eyes with clean, running water for at least 15 minutes & see a doctor.
  • Skin & Hair: Remove contaminated clothing. Immediately wash contaminated skin & hair with plenty of water.
  • Inhalation: Remove victim from exposure, to fresh air. Seek medical advice.
  • General: If irritation persists or feeling unwell, seek medical attention.

SAFETY PRECAUTIONS

 SAFETY PRECAUTIONS:

  • Avoid contact with skin & eyes;
  • Wear protective glasses and gloves when mixing or using;
  • Do NOT kneel in this product. Avoid all skin contact.

QUICK GUIDE TO CLEANING

Read Product Label, Technical Bulletin & SDS before using
Other Cleaning Products

The Aqua-Seal STS™ range of biodegradable Cleaners is formulated to clean & maintain your surface without fear of damage to your tile, stone or sealer. Our range of cleaners is for domestic & commercial use. Safe and effective for your routine daily clean or your periodic heavy duty clean.

Accessories

The Aqua-Seal STS™ range of accessories are designed to make sealing, cleaning and problem solving applications easier.

Problem Solvers

Stone and tile areas exhibit many specific problems such as efflorescence, grout residue and mineral staining. The Aqua-Seal STS™ range of Problem Solvers is designed to help solve these issues as safely and effectively as possible. There’s simply no other range of problem solvers for stone, tile, concrete & grout as comprehensive as Aqua-Seal STS™.

Sealer Options

The Aqua-Seal STS™ range of Sealers are formulated to provide either a Good, Better or Best type of performance based on the needs of the customer. The better the sealer then the better the protection, the longer the reaction time and the longer the life span of the sealer.

Important Information

 SAFETY PRECAUTIONS:

  • Avoid contact with skin & eyes;
  • Wear protective glasses and gloves when mixing or using;
  • Do NOT kneel in this product.
  • Avoid all skin contact.
Do NOT follow this link or you will be banned from the site!