Home > Products > Problem Solvers > Poultice Powder

Poultice Powder

Stain Removing Powder

Poultice Powder™ Stain Removal Paste for Porous Surfaces

Poultice Powder™ is a highly effective, easy to use, non acidic, absorptive clay powder designed to help remove most deep set stains from porous surfaces. It can also to be used as a mild abrasive cleaner to help boost the performance of cleaners for stubborn areas and remove light grout haze from natural stone. USE: On porcelain tiles, natural stone, terracotta, masonry and other porous surfaces.

Key Features
  • Safe, No fumes, No odour, Easy to use
  • Helps remove deep set stains with no bleaching effect
  • Mix with water or appropriate Aqua Seal STS Cleaner or Problem Solver
  • Can be used as an abrasive booster to cleaning solutions
  • Safe on all natural stone, tile, grout & concrete
Available In


Further Information
problem solver options

Stone and tile areas exhibit many specific problems such as efflorescence, grout residue and mineral staining. The Aqua-Seal STS™ range of Problem Solvers is designed to help solve these issues as safely and effectively as possible. There’s simply no other range of problem solvers for stone, tile, concrete & grout as comprehensive as Aqua-Seal STS™.


Efflorescence Cleaner & Inhibitor

Active Plus

Oxygenated Cleaner

Grout Release Pro

Pre-Grout Release Agent


Sealer & Coating Remover
Sealer Options

The Aqua-Seal STS™ range of Sealers are formulated to provide either a Good, Better or Best type of performance based on the needs of the customer. The better the sealer then the better the protection, the longer the reaction time and the longer the life span of the sealer.

Important Information

▶ The degree of success will be determined by factors including but not limited to type of surface stained, length of time stain has been in place, & whether the surface stained is sealed or unsealed.

▶ Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.

Do NOT follow this link or you will be banned from the site!