Grout Clean Pro

Spray Type Ready To Use Cleaner for Stone, Tile & Grout

Grout Clean Pro™ Stone, Tile & Grout Cleaner

GROUT CLEAN PRO – SPRAY TYPE READY TO USE CLEANER FOR STONE, TILE AND GROUT

Grout Clean Pro is a biodegradable, ready to use stone, tile & grout cleaner. Clean & Revive dirty tile & grout. No Acids. Use on all Stone, Tile & Grout surfaces. Helps remove light surface dirt, grease, grime & soap scum plus helps inhibit growthof mould, mildew & odours;

USE: For sealed surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, travertine etc plus porcelain tiles, encaustic tiles, terrazzo, concrete, pavers, saltillo, grout and other surfaces to clean and help maintain the surface.

Note: For high traffic, commercial or food areas or where premium performance/stain resistance is required – for a natural look use AQUA-SEAL GOLD+ and for a colour enhanced, enriched look use ENHANCE’N’SEAL

Key Features
  • Heavy Duty Clean & Revive, No Acid Formula
  • Ready To Use, No Mixing Required
  • Helps Restore Look of Dirty Tiles & Grout
  • Cleans Dirt, Grease, Grime, Soap Scum etc.
  • Helps inhibit Mould, Mildew & Odours
  • For Kitchen, Bathroom & Laundry Areas

AVAILABLE SIZE

500 ml     500 ml

TEST FIRST

Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.

PRECAUTIONS

  1. Always test first;
  2. Read entire label, SDS & product technical bulletinbefore using;
  3. Wear appropriate skin & eye protection;
  4. Use when surface temperature is between 4°C & 32°C
  5. Do not mix with other chemicals;
  6. Do not allow product to come in contact with any non-recommended surfaces;

APPLICATION INSTRUCTIONS

  1. Spray Grout Clean Pro directly to surface;
  2. Allow to dwell for 5-10 minutes;
  3. Scrub with white nylon pad;
  4. Wipe completely dry with absorbent paper towels or a clean dry cloth;
  5. Rinse thoroughly with clean water;
  6. Repeat the process as necessary;

NOTE: Heavily soiled areas may require further scrubbing and/or a longer dwell time or the use of a heavy duty cleaner like XtremeClean.

LIMITATIONS

  • Does not remove deep stains from stone, tile or grout;
  • Stained grout may require recolouring with Renue’N’Seal or re-grouting;
  • Will not restore polish finish to dull, etched, worn, scratched or honed surfaces;

HANDLING, STORAGE & CLEAN-UP

        • Close container tightly after each use;
        • Store between 4°C and 32°C.
        • Do not re-use container. Discard in rubbish.
        • Clean tools and hands with clean water.

FIRST AID

  • Contact a doctor or Poisons Information Centre (Australia Ph: 131-126, NZ Ph: 0800 764-766).
  • Ingestion: First aid is not generally required. If in doubt contact a Poisons Information Centre or a doctor
  • Eyes: No effects expected. If irritation does occur, flush contaminated eye(s) with lukewarm, gently flowing water for 5 minutes or until the product is removed. Obtain medical advice if irritation becomes painful or lasts more than a few minutes.
  • Skin & Hair: Remove contaminated clothing & wash contaminated skin & hair with plenty of water.
  • Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor
  • General: If irritation persists or feeling unwell, seek medical attention.

Other Cleaning Products

The Aqua-Seal STS™ range of biodegradable Cleaners is formulated to clean & maintain your surface without fear of damage to your tile, stone or sealer. Our range of cleaners is for domestic & commercial use. Safe and effective for your routine daily clean or your periodic heavy duty clean.

Accessories

The Aqua-Seal STS™ range of accessories are designed to make sealing, cleaning and problem solving applications easier.

Problem Solvers

Stone and tile areas exhibit many specific problems such as efflorescence, grout residue and mineral staining. The Aqua-Seal STS™ range of Problem Solvers is designed to help solve these issues as safely and effectively as possible. There’s simply no other range of problem solvers for stone, tile, concrete & grout as comprehensive as Aqua-Seal STS™.

Sealer Options

The Aqua-Seal STS™ range of Sealers are formulated to provide either a Good, Better or Best type of performance based on the needs of the customer. The better the sealer then the better the protection, the longer the reaction time and the longer the life span of the sealer.

Important Information

LIMITATIONS:

        • Will not restore polish finish to dull, etched, worn, scratched or honed surfaces;
          Contact Aqua-Seal STS for appropriate re-polishing product;

TEST FIRST:

        • Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.
Do NOT follow this link or you will be banned from the site!