Grip-It T

Anti-Slip Treatment for Ceramic and Porcelain Tiles

Grip-It T™ Anti Slip Treatment for Tiles
GRIP-IT T – Permanent Anti-Slip Treatment for Ceramic, Porcelain & tessellated Tiles

Grip-It T is a permanent treatment to create a slip resistant micro-texture. It is NOT a sealer or a coating. It will not peel or wear off. Makes slippery, wet surfaces safer e.g. bathrooms, swimming pool areas, balconies, living areas, main entrance etc. 

USE: For glazed and unglazed ceramic, porcelain and tessellated tiles in domestic, commercial, indoor and outdoor areas. For homes, hotels, motels, resorts, schools, child and aged care facilities, supermarkets, restaurants, bars etc

Key Features
  • Makes Slippery Surfaces Safer & Slip Resistant
  • Creates Slip Resistant Microtexture to Treated Surface
  • Professional Grade Formula – Non Coating, Non Yellowing
  • Ideal for Domestic, Commercial, Indoor and Outdoor Areas
Available In
1 Litre

1 Litre

4 Litre

4 Litre

How To Anti Slip Tiles – Quick Guide

How to Anti-Slip ceramic and porcelain tiles with Grip-It T.How to Anti-Slip your tiles with Grip-It T.

TEST FIRST

TEST FIRST: Always test first in an inconspicuous area to determine ease of application, dwell time, colour stability and desired results. End user must determine suitability of product for their own use.

PRECAUTIONS

PRECAUTIONS:

  1. Read entire label, SDS and technical bulletin before using;
  2. Use when surface temperature is between 4°C & 32°C;
  3. Do NOT pour in metal containers & remove all jewellery first;
  4. Do NOT allow product to come in contact with any acid sensitive, polished or non-recommended surfaces;
  5. Do NOT mix with ammoniated cleaners or any other chemicals;
  6. May affect dark grouts, grout colorants & polished surfaces;
  7. Depending on how much anti-slip micro-texture is created, some dark coloured tiles can lighten in colour & polished porcelain will start to lose it’s polished finish going from polished to satin to matt

SAFETY DIRECTIONS

SAFETY DIRECTIONS: CORROSIVE

    1. Wear protective gloves, eye & skin protection when using.
    2. Remove all metal jewellery before using – corrosive to metals;
    3. Do NOT breathe fumes, mist, vapours or spray or kneel in product;
    4. TOXIC – Do NOT eat, drink or smoke when using this product ;
    5. Avoid all contact with skin and eyes. Do not kneel in product;
    6. May cause blindness and burns.
    7. Burns might not be immediately painful or visible.
    8. Obtain calcium gluconate gel to neutralise if on skin.

SURFACE PREPARATION

SURFACE PREPARATION:
Use XtremeClean as per label to ensure a clean, dry surface before starting

HOW TO USE

HOW TO USE:

1. Sweep, vacuum or wipe for a clean, dry surface;

2. Pour Grip-It T into a PLASTIC paint tray, bucket or container; 

3. Carefully apply Grip-It T evenly to surface with a suitable sponge, brush, natural bristle broom or mop – do NOT spray;

4. DO NOT POUR DIRECTLY FROM BOTTLE TO THE SURFACE;

5. Allow  to dwell  for  about 5 minutes at a time -“dwell period”;

6. DO NOT ALLOW  PRODUCT TO DRY ON THE SURFACE – ADD MORE PRODUCT AS REQUIRED TO KEEP IT WET; 

7. After each 5 minute “dwell period”, test the amount of slip resistance created by using your shoe or a gloved hand in a scuffing/rubbing motion in the standing solution on the floor;

8. When desired level of slip resistance has been created, rinse off thoroughly with clean water;

9. Repeat the process as necessary.

LIMITATIONS

LIMITATIONS:

Slip resistance will be affected if treated surface is not cleaned and maintained regularly;

MAINTENANCE

MAINTENANCE:

After successfully treating the surface, use these products to ensure the slip resistance is properly maintained.

EzyClean for routine, everyday cleaning;

XtremeClean for periodic heavy duty cleaning;

NOTE: To reduce soiling and staining plus ease the ongoing maintenance, seal treated surface with Aqua-Seal Gold+.

HANDLING, STORAGE & CLEAN-UP

HANDLING, STORAGE & CLEAN UP: 

Close container tightly after each use and keep upright; Store locked up in original container in a well ventilated cool area and protect from sunlight; Do not re-use container. Rinse and discard in rubbish; Wash tools, gloves and shoes with water before they dry; WASH UNDERSIDE OF SHOES BEFORE STEPPING ONTO OTHER AREAS.

FIRST AID

FIRST AID:

Immediately contact Poisons Information Centre (Aust  131 126, NZ 0800 764766) or a doctor. Ingestion: Do NOT induce vomiting. Immediately rinse mouth with water. Eyes: Immediately flush eyes with clean, running water for at least 15 minutes. Skin & Hair: Remove contaminated clothing. Immediately flush contaminated skin & hair under running water for 15 minutes then apply calcium gluconate gel. Inhalation: Remove victim from exposure, to fresh air. Seek medical advice. General: If irritation persists or feeling unwell, seek medical attention.

Cleaner Options

The Aqua-Seal STS™ range of biodegradable Cleaners is formulated to clean & maintain your surface without fear of damage to your tile, stone or sealer. Our range of cleaners is for domestic & commercial use. Safe and effective for your routine daily clean or your periodic heavy duty clean.

Accessories

The Aqua-Seal STS range of accessories are designed to make sealing, cleaning and problem solving applications easier.

problem solver options

Stone and tile areas exhibit many specific problems such as efflorescence, grout residue and mineral staining. The Aqua-Seal STS™ range of Problem Solvers is designed to help solve these issues as safely and effectively as possible. There’s simply no other range of problem solvers for stone, tile, concrete & grout as comprehensive as Aqua-Seal STS™.

Sealer Options

The Aqua-Seal STS™ range of Sealers are formulated to provide either a Good, Better or Best type of performance based on the needs of the customer. The better the sealer then the better the protection, the longer the reaction time and the longer the life span of the sealer.

LIMITATIONS:

Slip resistance will be affected if treated surface is not cleaned and maintained regularly;

MAINTENANCE: 

After successfully treating the surface, use these products to ensure the slip resistance is properly maintained.

EzyClean for routine, everyday cleaning;

XtremeClean for periodic heavy duty cleaning;

NOTE: To reduce soiling and staining plus ease the ongoing maintenance, seal treated surface with Aqua-Seal Gold+.

TEST FIRST:

Due to the nature of different surfaces, you should test first in an inconspicuous area following the label instructions to determine ease of application, surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.

DESCRIPTION:

Grip-It T is a permanent treatment to create a slip resistant micro-texture. It is NOT a sealer or a coating. It will not peel or wear off. Makes slippery, wet surfaces safer e.g. bathrooms, swimming pool areas, balconies, living areas, main entrance etc. 

USE:

For glazed and unglazed ceramic, porcelain and tessellated tiles in domestic, commercial, indoor and outdoor areas. For homes, hotels, motels, resorts, schools, child and aged care facilities, supermarkets, restaurants, bars etc

TEST FIRST:

Always test first in an inconspicuous area to determine ease of application, dwell time, colour stability and desired results. End user must determine suitability of product for their own use.

PRECAUTIONS: 

1.  Read entire label, SDS and technical bulletin before using;  

2. Use when surface temperature is between 4°C & 32°C; 

3. Do NOT pour in metal containers & remove all jewellery first;

4. Do NOT allow product to come in contact with any acid sensitive,   polished or non-recommended surfaces;

5. Do NOT mix with ammoniated cleaners or any other chemicals;

6. May affect dark grouts, grout colorants & polished surfaces;

7. Depending on how much anti-slip micro-texture is created, some dark coloured tiles can lighten in colour & polished porcelain will start to lose it’s polished finish going from polished to satin to matt.

SAFETY DIRECTIONS: CORROSIVE

1. Wear protective gloves, eye & skin protection when using.

2. Remove all metal jewellery before using – corrosive to metals;  

3. Do NOT breathe fumes, mist, vapours or spray or kneel in product;

4. TOXIC – Do NOT eat, drink or smoke when using this product ;      

5. Avoid all contact with skin and eyes. Do  not kneel in product;

6. May cause blindness and burns. 

7. Burns might not be immediately painful or visible. 

8. Obtain calcium gluconate gel to neutralise if on skin.

SURFACE PREPARATION: 

Use XtremeClean as per label to ensure a clean, dry surface before starting.

HOW TO USE:

1. Sweep, vacuum or wipe for a clean, dry surface;

2. Pour Grip-It T into a PLASTIC paint tray, bucket or container; 

3. Carefully apply Grip-It T evenly to surface with a suitable sponge, brush, natural bristle broom or mop – do NOT spray;

4. DO NOT POUR DIRECTLY FROM BOTTLE TO THE SURFACE;

5. Allow  to dwell  for  about 5 minutes at a time -“dwell period”;

6. DO NOT ALLOW  PRODUCT TO DRY ON THE SURFACE – ADD MORE PRODUCT AS REQUIRED TO KEEP IT WET; 

7. After each 5 minute “dwell period”, test the amount of slip resistance created by using your shoe or a gloved hand in a scuffing/rubbing motion in the standing solution on the floor;

8. When desired level of slip resistance has been created, rinse off thoroughly with clean water;

9. Repeat the process as necessary.

LIMITATIONS:

Slip resistance will be affected if treated surface is not cleaned and maintained regularly;

MAINTENANCE: 

After successfully treating the surface, use these products to ensure the slip resistance is properly maintained.

EzyClean for routine, everyday cleaning;

XtremeClean for periodic heavy duty cleaning;

NOTE: To reduce soiling and staining plus ease the ongoing maintenance, seal treated surface with Aqua-Seal Gold+.

HANDLING, STORAGE & CLEAN UP: 

Close container tightly after each use and keep upright; Store locked up in original container in a well ventilated cool area and protect from sunlight; Do not re-use container. Rinse and discard in rubbish; Wash tools, gloves and shoes with water before they dry; WASH UNDERSIDE OF SHOES BEFORE STEPPING ONTO OTHER AREAS.

FIRST AID:

immediately contact Poisons Information Centre (Aust  131 126, NZ 0800 764766) or a doctor. Ingestion: Do NOT induce vomiting. Immediately rinse mouth with water. Eyes: Immediately flush eyes with clean, running water for at least 15 minutes. Skin & Hair: Remove contaminated clothing. Immediately flush contaminated skin & hair under running water for 15 minutes then apply calcium gluconate gel. Inhalation: Remove victim from exposure, to fresh air. Seek medical advice. General: If irritation persists or feeling unwell, seek medical attention.

AVAILABLE SIZES: 

• 1 litre

• 4 litre

Do NOT follow this link or you will be banned from the site!