Home > Products > Sealers > Aqua-Seal Gold+

Aqua-Seal Gold+

Premium Natural Look Sealer (Best)

Aqua-Seal Gold+™ Premium Natural look sealer with Rapid Seal. The choice of sealing professionals.

Aqua-Seal Gold+ Premium Natural Look Sealer for Stone, Tile, Grout, Encaustics, Terrazzo etc

AQUA-SEAL GOLD+ Used & trusted by Professionals. Perfect for when you need to make the right sealer choice. Provides Maximum Stain Resistance against oil, food and grime. Inhibits mould and mildew growth. AQUA-SEAL GOLD+ is a below surface, penetrating type, natural look sealer. It is water based and non flammable. It is non yellowing, non coating and UV resistant. It can be used as a pre-grouting sealer to help prevent grout haze and grout staining. Reduces freeze/thaw damage, spalling and efflorescence (salt deposits). It is breathable and allows excellent Moisture Vapour Transmission. Formulated with the latest Nano-AQS™ plus Rapid-Seal STS™ Technology. Provides maximum stain protection in 4 hours (Rapid Seal). Safe to use in food preparation and serving areas. Use as a stone sealer, tile sealer, encaustic sealer, terrazzo sealer or grout sealer. For indoor, outdoor, domestic & commercial areas. LOW VOC FORMULA (<5 gm/L).

USE: For porous surfaces e.g. all natural stone like basalt, bluestone, granite, limestone, marble, quartzite, sandstone, slate, travertine etc plus porcelain tiles, encaustic tiles, terrazzo, concrete, pavers, saltillo, grout and other surfaces where a natural look and maximum stain and water resistance is required.

Note: For high traffic, commercial or food areas or where premium performance/stain resistance is required – for a natural look use AQUA-SEAL GOLD+ and for a colour enhanced, enriched look use ENHANCE’N’SEAL.

Key Features
  • C6 Fluoro-Seal™ – Low VOC – Water Based Formula
  • Used & Trusted by Professionals – The Gold Standard
  • Rapid-Seal STS™ to provide stain resistance in 4 hours
  • Maximum Stain Resistance Against Oil, Food and Grime
  • Natural Look – Non Yellowing – Non Coating – Non Toxic
  • Reduces Freeze/Thaw Damage, Spalling and Efflorescence
  • Inhibits Mould and Mildew – Ideal To Use As A Pre-Sealer
  • For Indoor, Outdoor, Domestic & Commercial Applications

AVAILABLE SIZES

AVAILABLE SIZES:

  • 250ml         250 ml
  • 1 Litre        1 Litre
  • 4 Litre       4 Litre
  • 20 Litre     20 litre

TEST FIRST

Due to the nature of different surfaces, you should do a few inconspicuous test areas following label instructions to determine ease of application, surface colour stability and the desired results. The end user must determine the suitability of the product for their intended use.

PRECAUTIONS

  1. Read entire label, SDS & technical bulletin before using;
  2. Wear appropriate skin & eye protection & use in a ventilated area;
  3. Surface must be clean, dry & free from any sealers & coatings;
  4. Use when surface temperature is between 4°C and 32°C;
  5. Do NOT allow sealer to drip or leave drip marks on the surface;
  6. Do NOT use on the underside of the tile or stone. If six sided/dip.

PRE-GROUT SEALING

PRE-GROUT SEALING: For quick & easy clean-up after grouting as the porous surface may stain during installation and grouting.

  1. Pre-seal the front/top surface before installation or 24 hours after installation. Do NOT saturate the open grout joints;  
  2. Allow minimum 24 hours cure time before grouting;
  3. If using dark or contrasting grout, apply Grout Release Pro after Aqua-Seal Gold+ or Ultra-Block has cured, then grout.

APPLICATION INSTRUCTIONS

  1. Sweep, vacuum or wipe surface to be sealed;
  2. Apply sealer to the clean, dry surface using a sealer applicator, pump sprayer, sealer sponge, brush, paint roller or paint pad;
  3. Ensure an even coat and coverage then work product in thoroughly;
  4. After 5-10 minutes, wipe the surface COMPLETELY DRY with absorbent paper or cotton towels to remove any excess;
  5. DO NOT ALLOW PRODUCT TO DRY ON THE SURFACE;
  6. Repeat this process for each application;

APPLICATION NOTES

  1. For vertical surfaces apply from bottom to top and avoid run- down;
  2. Porous surfaces will require additional coats. If 2 or more coats are required, allow a minimum 30 minutes between coats;
  3. 2 hours after the final coat, conduct a test to determine if the surface is properly sealed. Apply a few water droplets to the surface. If the water is easily absorbed then apply an additional coat of sealer. Wait 2 hours and repeat the test.
  4. The surface is ready for light traffic after 2 hours. Keep dry for minimum 12 hours. Full cure in 24 hours.

LIMITATIONS

  • Sealer is NOT a waterproofing agent and will not prevent surface wear, scuff marks or etching from harsh or acidic chemicals.
  • Spills should be wiped up immediately to help minimise staining.

EXPECTED WEAR

Lasts up to 20 years. Performance & wear will vary depending on characteristics, texture & hardness of surface, traffic wear plus frequency and type of maintenance products used. Weather exposure, harsh cleaning methods like pressure washing, use of high alkaline, acidic cleaners or solvents will affect enhancement, wear & performance. High use & exterior areas may require more frequent applications. RE-SEAL AS NECESSARY.

MAINTENANCE

  • EzyClean for routine, everyday cleaning;
  • Boost for routine cleaning & help prolong sealer life span;
  • XtremeClean for periodic heavy duty cleaning;
  • AquaGuard for spary’n’wipe gleaming of bench tops plus help prolong sealer lifespan;
  • Clean’N’Gleam for one step spray’n’wipe closing of bench tops.

HANDLING, STORAGE & CLEAN-UP

  1. Close container tightly after each use;
  2. Store in original container between 4°C & 32°C. Shelf life is approx 2 years in unopened container – less after opening;
  3. Storage beyond that time does not necessarily mean the product is not usable.  Do a small test area first;
  4. Do not re-use container. Discard in rubbish;
  5. Clean tools and clothing with water before they dry.

FIRST AID

  1. Contact a doctor or Poisons Information Centre (Aust 131-126, NZ 0800 764 766).
  2. Skin & Eye Contact: Irritation is unlikely. If irritation does occur, flush with lukewarm, gently flowing water.
  3. Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
  4. Ingestion: If swallowed, do NOT induce vomiting. Wash mouth with water & give some water to drink.
  5. If you feel unwell seek medical advice.

Available In

250ml250ml

1 Litre

1 Litre

4 Litre

4 Litre

20 Litre

20 Litre

How To Video
Use For & Coverage
Approximate coverage per 1 litre per coat.
SURFACECOVERAGESURFACECOVERAGESURFACECOVERAGESURFACECOVERAGE
Basalt Flamed20 - 25m2Engineered Stone Honed16 - 20m2Marble Honed18 - 22m2Slate15 - 18m2
Basalt Honed25 - 30m2Engineered Stone Polished35 - 40m2Marble Polished28 - 33m2Terracotta15 - 18m2
Basalt Polished30 - 35m2Granite Flamed20 - 25m2Marble Tumbled16 - 20m2Terracotta Hand Made8 - 10m2
Bluestone Flamed20 - 25m2Granite Honed25 - 30m2Mother of Pearl35 - 40m2Terrazzo Honed20 - 25m2
Bluestone Honed25 - 30m2Granite Polished30 - 35m2Natural Stone Tables12 - 18m2Terrazzo Polished25 - 30m2
Bluestone Polished30 - 35m2Grout40 - 240m2Pavers13 - 16m2Tessellated35 - 40m2
Brick Pavers13 - 18m2Limestone Flamed16 - 20m2Porcelain Polished35 - 40m2Travertine Cross Cut20 - 25m2
Bi-Encaustic Tiles16 - 20m2Limestone Honed20 - 25m2Porcelain Honed35 - 40m2Travertine Flamed16 - 20m2
Concrete Honed16 - 20m2Limestone Polished23 - 27m2Quartzite15 - 18m2Travertine Honed20 - 25m2
Concrete Polished20 - 25m2Limestone Tumbled16 - 20m2Saltillo8 - 10m2Travertine Polished25 - 30m2
Encaustic Tiles16 - 20m2Marble Flamed16 - 20m2Sandstone12 - 15m2Travertine Tumbled16 - 20m2
QUICK GUIDE TO SEALING
Read Product Label, Technical Bulletin & SDS before using
Accessories

The Aqua-Seal STS™ range of accessories are designed to make sealing, cleaning and problem solving applications easier.

Cleaning Products

The Aqua-Seal STS™ range of biodegradable Cleaners is formulated to clean & maintain your surface without fear of damage to your tile, stone or sealer. Our range of cleaners is for domestic & commercial use. Safe and effective for your routine daily clean or your periodic heavy duty clean.

Other Sealer Options

The Aqua-Seal STS™ range of Sealers are formulated to provide either a Good, Better or Best type of performance based on the needs of the customer. The better the sealer then the better the protection, the longer the reaction time and the longer the life span of the sealer.

Problem Solver Options

Stone and tile areas exhibit many specific problems such as efflorescence, grout residue and mineral staining. The Aqua-Seal STS™ range of Problem Solvers is designed to help solve these issues as safely and effectively as possible. There’s simply no other range of problem solvers for stone, tile, concrete & grout as comprehensive as Aqua-Seal STS™.

Important Information

LIMITATIONS:

  • Sealer is NOT a waterproofing agent and will not prevent surface wear, scuff marks or etching from harsh or acidic chemicals. Spills should be wiped up immediately to help minimise staining.

TEST FIRST:

  • Due to the nature of different surfaces, you should do a few inconspicuous test areas following the label instructions to determine ease of application, surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.
Do NOT follow this link or you will be banned from the site!